Frequently
Asked
Questions

Frequently Asked Questions

Prefabricated houses are generally built on a platform and concrete slab. A concrete plan suited to your building’s needs is prepared and provided by our expert team.

A concrete plan suitable for the building you choose is prepared and delivered to you by our expert team.

Prefabricated houses can be built on zoned plots; outside these areas they can be built in line with permits set by the relevant authorities.

Kitchen fixtures are included in the standard package.

OSB, a vapour barrier, membrane and glass wool batts are used as roof insulation materials.

One of the most important features of prefabricated buildings is their fast production and installation times. Although it varies by project, the average delivery time for a house is 10–12 working days.

A zoning permit is required for prefabricated buildings. To obtain a building permit, building owners or their legal representatives apply by petition to the zoning department of the municipality or special provincial administration. The title deed, architectural project, structural project, electrical and plumbing projects, drawings and calculations, and a referenced or dimensioned sketch must be attached to the petition.

Prefabricated homes and workplaces are subject to the same taxes as reinforced concrete buildings.

Yes, electricity, water and natural gas can be connected to prefabricated buildings. In areas with village status, a subscription can be obtained by applying to the relevant institution with a letter of permission signed by the village headman and two members of the council of elders. For buildings with a municipal permit, an application is made to the relevant institution with an occupancy report or a completion certificate attached to the building permit.

Under Article 20 of the Zoning Law, prefabricated buildings can be built in accordance with the zoning plan, regulation provisions, and the permit and its annexes.

The main load-bearing system of prefabricated buildings is metal, while the exterior walls and partitions consist of cement-bonded particle board (Betopan) panels.

Stone wool, EPS or mineral wool is used for thermal insulation. A membrane and vapour barrier are used for waterproofing in roof insulation.

Yes, a central heating system can be installed in prefabricated buildings.

All standard electrical and plumbing installations inside the building are carried out by the manufacturer.

Bathroom fittings are delivered complete with a shower tray, pedestal basin, floor-mounted squat toilet or WC and all accessories.

In prefabricated buildings, exterior wall thicknesses of 6, 10 or 14 cm and interior wall thicknesses of 6 or 10 cm are used.

Prefabricated buildings are manufactured taking earthquake zone requirements into account.

Prefabricated buildings are designed and manufactured taking into account information such as wind speed, snow load and rainfall in the region where the building will be installed.

Regular maintenance of prefabricated buildings varies depending on the building material, environmental factors and intensity of use. Exterior cleaning and painting should generally be done at regular intervals; roof maintenance includes checking insulation materials, and electrical and plumbing installations should be reviewed regularly. Heating and cooling systems should be serviced periodically and the overall structural condition assessed at regular intervals. This maintenance is important for the buildings to be used safely for a long time.

The permits and licences required from the municipality must be completed and the concrete slab must be prepared in accordance with the building plan.

Prefabricated buildings are designed with a modular structure, and assembly and disassembly can be carried out allowing for 10–20% loss. Taking wear into account, more than 6 assembly/disassembly cycles are not recommended.

Standard heights in prefabricated buildings are 2.50 m, 2.80 m and 3.00 m.

Prefabricated buildings consist of building elements manufactured in a factory and then transported to the construction site for assembly.

Steel frame houses are buildings whose main load-bearing system is made of steel, standing out for their durability and fast construction process.

Container buildings are portable, modular building units generally made of metal or steel. Produced in standard shipping sizes, they can be used as temporary accommodation on construction sites, in disaster areas and at military bases, as offices, shops or warehouses in commercial areas, and even as homes. With their fast installation, low cost and easy portability, containers offer practical solutions for a variety of needs.

Fast construction time, cost-effectiveness, durability, flexibility and environmental friendliness are the main advantages of these buildings.

Installation time ranges from a few days to a few weeks depending on the size and design of the house.

Installation time generally ranges from a few weeks to a few months.

Container homes can be installed within a few days to a few weeks.

Prefabricated site buildings are pre-manufactured building solutions used temporarily or permanently on construction sites, at industrial facilities, in mines and in emergency projects.

Prefabricated site buildings offer advantages such as fast installation, portability, low cost, production with environmentally friendly materials and reusability.

Generally built on steel frames, prefabricated site buildings are highly durable, lightweight and easy to transport.

Installation is carried out by assembling ready-made parts; installation time varies by building but is usually completed in a short time.

Preparations such as levelling the installation area, preparing the ground and obtaining the necessary permits are important.

Costs can vary depending on the quality of materials used, dimensions, additional features and installation location.

Customisation options can include building dimensions, interior layouts, insulation options and exterior cladding, and they can be adapted to customer requirements.

The buildings are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with all required standards and permits.

Maintenance is generally carried out through regular cleaning and periodic structural inspections; the condition of the load-bearing systems and insulation is reviewed and maintenance is carried out if necessary.

Containers are portable metal building units used for various purposes such as storage, transport, offices, living spaces and temporary accommodation.

Containers offer advantages such as fast installation, easy portability, security, durability and a wide range of uses.

Generally made of steel, containers are designed to withstand weather and transport conditions.

Containers are generally transported to the site and installed; the installation area may need to be prepared and the necessary local permits obtained.

Costs can vary depending on the container’s dimensions, features, material quality and delivery location.

The interior and exterior design, insulation options and additional features of containers can be adapted to customer requirements.

Containers are generally maintained through regular cleaning and checking the equipment inside, and repairs are carried out when necessary.

New-generation containers are generally made from environmentally friendly materials and can be designed to be recyclable.

Containers should be used under conditions suitable for the materials stored or transported in them, with safety and hygiene measures in place.

The service life of containers can vary depending on material quality and maintenance; recycling can be carried out when necessary.

Light steel buildings are lightweight, durable and portable building solutions built on steel frames.

Light steel buildings offer advantages such as fast installation, flexible design options, energy efficiency and environmental friendliness.

Light steel buildings are constructed by assembling factory-made parts; installation time can vary depending on the size of the building.

Light steel buildings are generally made of galvanised steel, are highly durable and can be long-lasting.

Features such as interior and exterior design options, insulation properties and different façade claddings can be adapted to customer requirements.

Costs can vary depending on the size and features of the buildings, the quality of materials used and the delivery location.

Light steel buildings can be designed for local climate conditions and reinforced according to factors such as wind and snow loads.

Maintenance is generally carried out through regular cleaning and checking the equipment inside; preserving structural integrity is important.

The buildings are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with all required standards and permits.

New-generation light steel buildings are generally made from environmentally friendly materials and can be designed to be recyclable.

Steel hangar solutions are large steel building units used in wide areas such as airports, industrial facilities, storage areas and the agricultural sector.

Steel hangar solutions offer advantages such as fast installation, large interior volume, durability, long service life and low maintenance costs.

Steel hangars are generally made of high-quality steel and can be designed to be long-lasting and weather-resistant.

Installation is carried out by assembling ready-made parts; the necessary permits may need to be obtained for the installation area.

Costs can vary depending on the hangar’s dimensions, features, the quality of materials used and the installation location.

Features such as the interior and exterior design of hangars, door options and insulation solutions can be adapted to customer requirements.

Maintenance is generally carried out through regular cleaning and checking the equipment inside; preserving structural integrity is important.

New-generation steel hangar solutions are generally made from environmentally friendly materials, and energy efficiency measures can be taken.

The durability of hangars can be increased by designing them with high-quality steel materials and long-lasting coating solutions.

The buildings are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with all required standards and permits.

Open structural profiles are steel profiles used for solar beams, support elements and various framing applications.

Open structural profiles offer advantages such as light weight, high load-bearing capacity, flexibility, ease of assembly and long service life.

Open structural profiles are generally made of high-quality steel and can be designed to be long-lasting and resistant to various climate conditions.

Installation is carried out by assembling prefabricated parts; the necessary permits may need to be obtained for the installation area.

Costs can vary depending on the profiles’ dimensions, thicknesses, features and delivery location.

Features such as profile options, dimensions, drilling and special cuts can be adapted to customer requirements.

Maintenance is generally carried out through regular cleaning and checking the equipment inside; preserving structural integrity is important.

New-generation open structural profiles are generally made from environmentally friendly materials and can be designed to be recyclable.

The durability of the profiles can be increased by designing them with high-strength steel materials and long-lasting coating solutions.

The profiles are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with all required standards and permits.

Solar system profiles are specially designed steel profiles used to mount solar energy panels.

Solar system profiles offer advantages such as light weight, high durability, long service life, ease of assembly and low maintenance costs.

Solar system profiles are generally made of high-quality steel and can be designed to withstand long-term sun exposure.

Installation is carried out by assembling specially designed parts; the necessary permits may need to be obtained for the installation area.

Costs can vary depending on the profiles’ dimensions, features, the quality of materials used and the installation location.

Features such as profile options, dimensions, mounting angles and adaptation to solar panel types can be adapted to customer requirements.

Maintenance is generally carried out through regular cleaning and checking the equipment; correct panel mounting and monitoring solar panel performance are important.

New-generation solar system profiles are generally made from environmentally friendly materials and can be designed taking into account the environmental impact of solar energy use.

The durability of the profiles can be increased by designing them with high-strength steel materials and long-lasting coating solutions.

The profiles are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with safety standards and local permits.

Cabins are portable building units used for various purposes such as offices, living spaces, commercial use, construction sites and emergency shelter needs.

Cabins offer advantages such as fast installation, portability, security, durability and a variety of size and design options.

Cabins are generally made of light steel or container building materials and can be designed as durable, portable structures.

Installation is carried out by assembling ready-made parts; installation time can vary depending on the size and features of the cabin.

Costs can vary depending on the cabin’s dimensions, features, the quality of materials used and the delivery location.

Features such as the interior and exterior design of cabins, insulation options and different door and window options can be adapted to customer requirements.

Cabins are generally maintained through regular cleaning and checking the equipment inside, and repairs are carried out when necessary.

New-generation cabins are generally made from environmentally friendly materials, and energy efficiency measures can be taken.

The durability of cabins can be increased by designing them with high-strength materials and long-lasting coating solutions.

Cabins are designed and manufactured in accordance with the relevant local regulations, ensuring compliance with safety standards and local permits.

Request Form

* Under the Personal Data Protection Law (KVKK), you need to accept the legal notice so that we can send you e-mails.